Knowing the correct oil capacity is important when servicing an SVL75-2 because both underfilling and overfilling can cause problems.
Kubota SVL75 2 Engine Oil Capacity
The Kubota SVL75-2 engine oil capacity is approximately 10 liters (2.6 US gallons or about 10.6 US quarts) with the engine oil filter.
| Specification | Kubota SVL75-2 |
|---|---|
| Machine | Kubota SVL75-2 |
| Machine type | Compact track loader |
| Engine | Kubota V3307-CR-TE4 |
| Engine type | 4-cylinder turbocharged diesel |
| Displacement | 3,331 cc (203.3 cu. in.) |
| Gross engine power | 74.3 hp |
| Engine oil capacity with filter | 10 L (2.6 US gal.) |
| Approximate capacity in quarts | 10.6 US qt |
| Common oil viscosity | 15W-40 |
| Hydraulic system capacity | 60 L |
| Fuel tank capacity | 93 L |
| Cooling system capacity | 11 L |
Kubota’s maintenance information lists the SVL75 engine family at 10 liters of engine oil, including the oil contained in the filter, while Kubota’s lubricant reference specifically lists 9.3 liters of 15W-40 engine oil for the SVL75-2. This difference can reflect the distinction between a specified refill amount and the practical service-fill quantity, so the dipstick should always be used to establish the final oil level.
Related Engine Oil for Kubota Tractor(Recommended By Kubota)
Good Engine Oils for Kubota SVL75-2
1. Shell Rotella T4 15W-40
- 15W-40 diesel engine oil with Triple Protection technology protects against wear, deposits, and oil breakdown
- Provides significantly better wear protection than previous generation oils to maximize engine efficiency and prolong en…
- Formulated with advanced additive technology plus synthetic base oil for enhanced deposit control and superior engine cl…
- Heavy-duty diesel formulation
- 15W-40 viscosity
- Designed for demanding diesel applications
- Good choice for construction and agricultural equipment
- Available in multiple container sizes
2. Mobil Delvac 1300 Super 15W-40
- Excellent soot-viscosity control enables greater engine efficiency, long engine and oil life
- Excellent thermal and oxidation stability helps reduce engine deposits and sludge build up to keep engines running relia…
- Enhanced TBN reserves improves corrosion protection and extends drain intervals for both new and old engines using eithe…
- Heavy-duty diesel engine oil
- Strong protection against wear and deposits
- Suitable for high-load operating conditions
- Designed for modern diesel engines
- Good option for compact track loaders
3. 15W-40 API CK-4 Diesel Engine Oil
- The information below is per-pack only
- WHY TRIAX: Quieter engine operation, lower operating temperature, 4-6% MPG Improvement, faster and smoother turbo spooli…
- FRICTION MODIFIED: Boosted with Nano-Boron and Moly friction modifiers for significantly improved wear protection over a…
- Meets the important 15W-40/CK-4 specification
- Suitable for diesel-powered heavy equipment
- Good high-temperature protection
- Helps maintain engine cleanliness
What Engine Does the SVL75-2 Use?
The Kubota SVL75-2 uses the V3307-CR-TE4 diesel engine. It is a water-cooled, four-cylinder diesel with a total displacement of 3,331 cc. The engine produces 74.3 gross horsepower at 2,400 rpm and is designed for demanding compact-track-loader applications.
Because the SVL75-2 is frequently used for construction, excavation, grading, landscaping, material handling, and other heavy-duty work, the engine can experience significant loads. Maintaining the correct oil level and changing the oil at the recommended service interval are therefore important parts of routine maintenance.
Related Kubota KX033 4 Engine Oil Capacity(+Best Recommended Oil)
What Oil Does a Kubota SVL75-2 Take?
A 15W-40 diesel engine oil is a common choice for the SVL75-2. Kubota’s lubricant reference lists Kubota CK-4 15W-40 engine oil for the SVL75-2.
However, the correct viscosity can depend on operating temperature and the specifications stated in the operator’s manual for your particular machine. If the loader is operated in very cold conditions, consult the Kubota manual for the appropriate viscosity range rather than automatically using 15W-40.
When choosing replacement oil, look for a quality heavy-duty diesel formulation that meets the applicable API service requirements. Using oil intended for diesel engines provides the detergency, wear protection and high-temperature performance required by a hard-working industrial diesel.
Related Kubota D902 Engine Oil Capacity Chart(Complete Guide)
How to Change the Engine Oil on an SVL75-2
Changing the engine oil is a routine maintenance procedure, but the loader should be parked safely before beginning the job.
1. Park the loader safely
Park the SVL75-2 on a level surface and lower the attachment to the ground. Shut the engine off, remove the key and allow the oil to cool enough to handle safely.
2. Access the drain plug
The engine oil drain area is located underneath the machine. Remove the necessary under-cover components to access the drain plug and provide a suitable container for the used oil.
3. Drain the old oil
Remove the drain plug and allow the used engine oil to drain completely. Used oil can be hot, so wear appropriate gloves and avoid direct contact.
4. Replace the oil filter
Replacing the oil filter during an oil change is important because the old filter contains contaminated oil and accumulated particles. The SVL75-2 uses an engine oil filter that should be replaced according to the maintenance procedure.
Before installing the new filter, lightly lubricate its O-ring with clean engine oil and tighten it according to the manufacturer’s instructions.
5. Add fresh engine oil
Reinstall the drain plug securely and add fresh engine oil through the engine oil filling port. Do not immediately pour in the entire theoretical capacity without checking the level.
A practical approach is to add most of the expected quantity first, allow the oil to settle, and then check the dipstick.
6. Check the dipstick
Start the engine briefly and allow it to run, then shut it off and wait for the oil to settle. Check the dipstick on level ground.
Add oil gradually until the level reaches the specified range. Avoid filling above the maximum mark.
Related Kubota Engine Oil Filter(Top 5 Best Picks 2026)
How Often Should You Change SVL75-2 Engine Oil?
Engine oil service intervals can depend on the specific maintenance schedule and operating conditions. Kubota maintenance information for the SVL75 family identifies regular engine-oil checks and scheduled oil changes, while parts/service information for the SVL75-2 lists an initial oil change after 50 hours followed by regular service intervals.
For machines working in dusty construction environments, high-load applications or other severe conditions, regular inspections become particularly important. Always use the maintenance schedule in the operator’s manual for your specific serial-numbered machine as the final authority.
Signs Your SVL75-2 May Need an Oil Change
Several symptoms can indicate that engine oil needs attention:
- Dark, dirty or contaminated-looking oil
- Oil level below the recommended range
- Unusual engine noise
- Increased oil consumption
- Oil-pressure warning light
- Visible oil leaks
- Excessive exhaust smoke
- Reduced engine performance
Dirty oil alone does not necessarily mean that the engine has a problem because diesel engine oil can darken relatively quickly. Oil level, service hours, oil condition and the manufacturer’s maintenance schedule should all be considered.
Don’t Confuse Engine Oil Capacity With Hydraulic Oil Capacity
The SVL75-2 contains several different fluids, and their capacities are substantially different. The engine oil capacity is approximately 10 liters, while the complete hydraulic system holds approximately 60 liters (15.9 US gallons). The hydraulic tank itself has a service capacity of approximately 35 liters. The fuel tank holds approximately 93 liters, and the cooling system capacity is approximately 11 liters.
This distinction is important when performing maintenance because hydraulic oil, engine oil and other fluids have different specifications and should never be substituted for one another.
Final words
The Kubota SVL75-2 engine oil capacity is about 10 liters (2.6 US gallons) with the oil filter. The machine uses the Kubota V3307-CR-TE4 3.3-liter four-cylinder diesel engine. Kubota’s lubricant reference lists 15W-40 CK-4 engine oil for the SVL75-2.
When performing an oil change, do not rely on capacity alone. Add oil gradually and use the dipstick to confirm that the final level is within the manufacturer’s specified range. Replacing the oil filter at the same time is also recommended.
For exact service intervals, oil specifications and procedures, consult the operator’s manual for your particular SVL75-2.
Quick answer: The Kubota SVL75-2 takes approximately 10 L (2.6 US gal.) of engine oil with the filter.
