Routine oil changes are one of the most important aspects of maintaining your Indian Scout motorcycle.
This guide explains the correct oil capacity across Scout models, how to check the oil level properly, and why filling to the proper amount matters.
Indian Scout Oil Capacity
The Indian Scout typically holds 3.0 to 4.0 quarts (2.8 to 3.8 liters) of 15W-60 full synthetic motorcycle oil during a standard oil and filter change.
Newer models or fully drained engines may require up to 4.5 quarts, and about 5.25 quarts when filling a completely dry engine. Always check the oil level when warm and upright to avoid overfilling.
| Model / Condition | Quarts (With Filter) | Liters (With Filter) |
|---|---|---|
| Indian Scout (2015–2024) | ~3.0–4.0 quarts | ~2.8–3.8 liters |
| Indian Scout Bobber (2018–2024) | ~3.0–4.0 quarts | ~2.8–3.8 liters |
| Indian Scout Sixty (2016–2024) | ~3.0–4.0 quarts | ~2.8–3.8 liters |
| Indian Scout Bobber Sixty (2020–2024) | ~3.0–4.0 quarts | ~2.8–3.8 liters |
| Indian Scout Bobber Twenty (2020–2024) | ~3.0–4.0 quarts | ~2.8–3.8 liters |
| Indian Scout Rogue (2022–2024) | ~3.0–4.0 quarts | ~2.8–3.8 liters |
| Indian Scout Rogue Sixty (2022–2024) | ~3.0–4.0 quarts | ~2.8–3.8 liters |
| Indian Scout 100th Anniversary Edition (2020) | ~3.0–4.0 quarts | ~2.8–3.8 liters |
| Indian Scout (2025) – Standard Refill | ~3.5–4.0 quarts | ~2.8–3.8 liters |
| Indian Scout (2025) – Full Oil & Filter Change | ~4.5 quarts | ~4.25 liters |
| Indian Scout (2025) – New/Dry Engine Fill | ~5.25 quarts | ~4.95 liters |
Related Honda Rebel 500 Oil Capacity(+ Best Recommended Oils)
Best Recommended Oil Indian Scout
Click the Links Below to Check the Latest Prices on AMAZON
1. Indian Motorcycle Full Synthetic 15W-60 (Oil Change Kit)
Key Features:
- Designed specifically for Indian Scout engines.
- Full synthetic formulation for excellent heat and wear protection.
- Optimized for V-Twin engines with integrated transmissions.
- Provides smooth clutch engagement and reduces engine noise.
- The kit version includes oil filter and washers for a complete service.
2. Klotz Synthetic V-Twin 15W-60 (Oil Change Kit)
Key Features:
- Meets the viscosity needs of most Scout models exactly.
- Formulated to resist thermal breakdown under high load.
- Contains additive packages to reduce internal wear and corrosion.
- Designed for V-Twin motorcycles used in hot climates or long rides.
- Provides strong gear and clutch lubrication.
3. Motul 7100 4T 10W-60 Synthetic Ester
Key Features:
- 100% synthetic with Ester-based technology for superior film strength.
- Popular among performance-focused motorcycle riders.
- Maintains consistent lubrication at high RPM and high temperatures.
- Wet-clutch safe and helps ensure smooth shifting.
- Suitable for riders who demand premium oil performance.
4. Amsoil Full Synthetic 10W-60 Motorcycle Oil
Key Features:
- Designed for extended oil change intervals and heavy-duty use.
- Excellent thermal stability to prevent oil thinning at high heat.
- Reduces engine wear and internal friction.
- Works well in high-temperature riding conditions.
- Maintains clutch grip under acceleration and load.
- Oil Grade: Full Synthetic 15W-60
- Type: Motorcycle engine oil formulated for wet-clutch systems
- Filter: Replace the oil filter at every oil change
This oil weight is specifically chosen to handle the Scout’s operating temperatures and gearbox/clutch integration. Using the correct viscosity helps prevent clutch slip, excessive wear, and overheating.
Related Harley Davidson Engine Oil Capacity Chart(For ALL Models)
Why the Oil Capacity Varies
Owners often notice that they don’t use the exact same amount of oil every time they change it. The variation occurs because the Scout uses a semi-dry sump system, which means some oil can remain in internal passages even after draining. Other factors include:
- Whether the oil filter is changed
- How long was the engine allowed to drain
- The motorcycle’s angle while draining
- Engine temperature during the oil change
- Whether the engine is “dry” (new or rebuilt) or simply being refilled
Because of this, oil capacity numbers are ranges rather than a single fixed volume.
Related Best Motor Oil for Small Engines(Top 5 Best 2025)
How to Check Oil Level Correctly
The Scout requires a specific method to ensure accurate oil readings:
- Warm up the engine for a few minutes to circulate the oil.
- Turn off the engine and let it sit briefly.
- Keep the motorcycle straight upright, not on the side stand.
- Remove the dipstick, wipe it, and reinsert it without screwing it in.
- Check the oil level:
- It should be between ADD and FULL.
- If near ADD, add small amounts, about 4–6 oz (120–180 ml) at a time.
- Do not overfill, overfilling is more harmful than slightly underfilling.
The difference between ADD and FULL on the dipstick is approximately 0.45 liters (16 oz or ½ quart).
Signs of Overfilling
Overfilling the oil can cause:
- Reduced engine performance
- Excess crankcase pressure
- Oil entering the air intake system
- Oil-saturated air filter
- Increased engine temperature
If oil is overfilled, it must be drained back down to the correct level — never run the engine heavily when overfilled.
Related Germany Oil for Motorcycle Engines(Top 7 Best Brands)
Suggested Oil Change Intervals
| Riding Condition | Change Interval |
|---|---|
| Normal everyday riding | Every 5,000 miles (8,000 km) |
| Frequent short trips | Every 3,000 miles (5,000 km) |
| Hot climates / heavy loads | Every 2,500–4,000 miles (4,000–6,500 km) |
| Storage use | Change oil before and after long storage |
FAQs
How much oil does Indian Scout take?
Most Indian Scout models, including the Scout and Scout Bobber, take approximately 3.0 to 4.0 quarts (2.8 to 3.8 liters) of oil during a standard oil and filter change. Newer models or fully drained engines may require slightly more, so always confirm using the dipstick after filling.
What oil does an Indian Scout take?
The Indian Scout uses full synthetic 15W-60 motorcycle oil formulated for wet-clutch systems. This viscosity offers strong heat resistance, stable lubrication at high RPM, and smooth clutch performance. Always ensure the oil is labeled specifically for motorcycles, not automotive engines.
How to check Indian Scout oil level?
To check the oil level, warm up the engine for a few minutes, then shut it off and keep the motorcycle upright (not on the side stand). Remove the dipstick, wipe it, reinsert it without threading, and check the oil level. The oil should be between the ADD and FULL marks. Add oil in small amounts if needed.
How much oil does a 2019 Indian Scout 60 take?
A 2019 Indian Scout Sixty typically requires around 3.0 to 4.0 quarts (2.8 to 3.8 liters) of oil when performing a standard oil and filter change. Always verify the actual capacity using the dipstick after filling, as it can vary slightly depending on how thoroughly the old oil was drained.
Final Thoughts
For most Indian Scout models from 2015 to 2024, expect to use about 3.0 to 4.0 quarts of oil during a typical oil and filter change. The 2025 model can require up to 4.5 quarts when properly filled, and new or dry engines require the full 5.25-quart fill.
The key is not to rely solely on the number, always verify oil level using the dipstick on a level motorcycle with a warm engine. This ensures the engine has the right amount of lubrication without risking damage due to overfilling or underfilling.
