This guide covers the 2023 Ford F-150 5.0 oil capacity, recommended oil type, best oil options, oil change intervals, and other important maintenance information.
2023 Ford F150 5.0 Oil Capacity
The 2023 Ford F-150 equipped with the 5.0L V8 engine has an engine oil capacity of 7.75 quarts (7.33 liters), including the oil filter.
| Specification | Details |
|---|---|
| Vehicle | 2023 Ford F-150 |
| Engine | 5.0L Ti-VCT V8 |
| Engine oil capacity | 7.75 quarts (7.33 liters) |
| Oil filter | Included in capacity |
| Recommended oil type | SAE 5W-30 |
| Engine configuration | Naturally aspirated V8 |
| Oil checking method | Engine oil dipstick |
When performing an oil change, you should have enough oil available to fill the engine and account for the new oil filter. After refilling, check the dipstick to confirm that the oil level is within the recommended operating range.Do not pour all the oil into the engine without checking the level. Add oil gradually, allow it to settle, and use the dipstick to verify the correct level. Avoid overfilling because excessive engine oil can cause lubrication problems and damage internal components.
Related Ford F150 Refrigerant Capacity(Models 1997-2026)
Best Engine Oil for the 2023 Ford F-150 5.0
1. Motorcraft SAE 5W-30 Synthetic Blend Motor Oil
- Motorcraft SAE 5W-30 Synthetic Blend Motor Oil XO-5W30-Q1SP Individual 1 Quart Bottle
- Application: Ford: (22-24 Bronco, 21-23 Bronco Sport, (16-25 E-350/E-450/(Super Duty F-250/F-350/F-450/F-550)), 12-24 Ed…
- Supersedes Part Number: XO-5W30-QSP
Motorcraft is Ford’s recommended oil brand, making its SAE 5W-30 formulation a natural choice for the 2023 F-150 5.0.
It is designed to meet Ford’s engine oil requirements and provides lubrication for everyday driving, towing, and other demanding operating conditions.
Key features:
- SAE 5W-30 viscosity.
- Meets Ford WSS-M2C961-A1 specification.
- Designed for gasoline engines.
- Suitable for normal operating conditions.
- Factory-recommended oil brand.
Related 2024 Ford F150 5.0 Oil Capacity(+Best Recommended Oil)
2. Mobil 1 Advanced Full Synthetic 5W-30
- Mobil 1 advanced full-synthetic motor oil 5W-30 utilizes Mobil 1’s signature Triple Action Formula to deliver outstandin…
- Helps protect critical engine parts for up to 10,000 miles between oil changes,* controlling oxidation to prevent oil br…
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping …
Mobil 1 Advanced Full Synthetic 5W-30 is a full synthetic engine oil designed to provide protection against engine wear, deposits, and high-temperature operation.
It can be an option for F-150 owners who prefer full synthetic lubrication, provided the exact formulation meets Ford’s required specification.
Key features:
- Full synthetic formulation.
- SAE 5W-30 viscosity.
- Helps protect against engine wear.
- Helps control sludge and deposits.
- Designed for varying driving conditions.
3. Pennzoil Platinum Full Synthetic 5W-30
- The information below is per-pack only
- 5W-30 motor oil formulated to keep engines clean and responsive
- Provides proven wear protection (based on Sequence IVA wear test using SAE 5W-30)
Pennzoil Platinum Full Synthetic 5W-30 is another option worth considering. Its synthetic formulation is designed to keep engine components clean while providing protection under different operating conditions.
Before purchasing, verify that the particular product formulation meets Ford WSS-M2C961-A1 requirements.
Key features:
- Full synthetic engine oil.
- SAE 5W-30 viscosity.
- Helps reduce engine deposits.
- Provides protection against wear.
- Suitable for modern gasoline engines when specification requirements are met.
Related 1997 Chevy 1500 AC Refrigerant Capacity(+Best Refrigerant)
Recommended Oil Type for the 2023 Ford F-150 5.0
Ford recommends SAE 5W-30 engine oil for the 5.0L V8 engine. This viscosity provides suitable lubrication during cold starts and helps maintain an appropriate protective oil film when the engine reaches normal operating temperature.
The recommended Ford oil specification is WSS-M2C961-A1.
Motorcraft SAE 5W-30 is Ford’s recommended choice. If you cannot find it, choose another oil that meets the specified viscosity and Ford performance requirements.
When purchasing engine oil, look for the following:
- SAE 5W-30 viscosity grade.
- Ford WSS-M2C961-A1 specification.
- Appropriate API certification for gasoline engines.
- A reputable manufacturer with established oil quality standards.
Avoid choosing engine oil based on viscosity alone. Meeting the manufacturer’s specification is equally important.
Related 2018 Ford Explorer Oil Capacity(+Recommended Oils)
How to Change Oil in a 2023 Ford F-150 5.0
Changing the engine oil in your F-150 is a straightforward maintenance procedure if you have the correct tools and follow proper safety precautions.
Here is a general oil change procedure.
1. Prepare the truck
Park the vehicle on level ground and switch off the engine. Allow the exhaust and engine components to cool sufficiently before working underneath the truck.
2. Drain the old engine oil
Place an appropriate drain pan underneath the oil pan. Remove the drain plug carefully and allow the old oil to drain completely.
3. Replace the oil filter
Remove the old oil filter and inspect its mounting surface. Install a compatible replacement filter, following the manufacturer’s installation instructions.
4. Reinstall the drain plug
Inspect the drain plug and its sealing washer. Reinstall it according to Ford’s specified torque requirements.
5. Add fresh engine oil
Pour in the recommended SAE 5W-30 oil gradually. Start below the specified capacity and check the dipstick before adding more.
6. Check for leaks
Start the engine briefly and inspect the oil filter and drain plug area for leaks. Switch off the engine and allow the oil to settle before checking the level again.
7. Verify the oil level
Use the dipstick to ensure the oil level falls within the recommended operating range. Add small amounts if necessary, avoiding overfilling.
Related 2018 Ford F150 5.0 Oil Capacity(+Best Recommended Oil)
2023 Ford F-150 5.0 Oil Change Interval
Ford’s Intelligent Oil-Life Monitor helps determine when your engine oil needs replacement. Rather than relying entirely on a fixed mileage interval, the system considers operating conditions and engine usage.
However, how frequently you change your oil depends on your driving habits.
Consider more frequent oil changes if you regularly:
- Tow heavy trailers.
- Drive in dusty environments.
- Spend considerable time idling.
- Operate the truck in extreme temperatures.
- Make frequent short trips that prevent the engine from reaching normal operating temperature.
Check the Intelligent Oil-Life Monitor regularly and follow the maintenance schedule in your owner’s manual.
Also, inspect your oil level periodically, particularly before long journeys or towing trips.
How to Check Engine Oil in a 2023 Ford F-150 5.0
Checking the engine oil level is an important maintenance task that helps prevent engine damage.
Follow these steps:
- Park your F-150 on level ground.
- Switch off the engine and allow the oil to settle.
- Locate and remove the engine oil dipstick.
- Wipe the dipstick clean using a lint-free cloth.
- Insert it fully into its tube.
- Remove it again and inspect the oil level.
- Confirm that the oil falls within the recommended operating range.
If the level is below the minimum mark, add the recommended SAE 5W-30 oil in small quantities and recheck.
Avoid overfilling because excessive oil can cause lubrication problems and damage engine components.
Does the 2023 Ford F-150 5.0 Require Synthetic Oil?
The 2023 Ford F-150 5.0 owner’s manual recommends Motorcraft SAE 5W-30 motor oil meeting specification WSS-M2C961-A1. The recommended oil may be a synthetic blend.
Full synthetic oil can also be considered when the particular formulation meets the required Ford specification.
The important consideration is not simply whether the oil is synthetic or conventional. It must meet the manufacturer’s viscosity and performance requirements.
Ford also advises against using supplemental engine oil additives because they are unnecessary and could potentially cause engine damage.
FAQs
How many quarts of oil does a 2023 Ford F-150 5.0 take?
The 2023 Ford F-150 with the 5.0L V8 engine requires 7.75 quarts (7.33 liters) of engine oil, including the oil filter.
What oil does a 2023 Ford F-150 5.0 use?
It uses SAE 5W-30 engine oil meeting Ford specification WSS-M2C961-A1. Motorcraft SAE 5W-30 is Ford’s recommended option.
Can I use 5W-20 in my 2023 F-150 5.0?
Ford specifies SAE 5W-30 for the 2023 5.0L engine. Do not substitute 5W-20 unless Ford specifically authorizes it for your vehicle and operating conditions.
Is 0W-30 suitable for the 2023 F-150 5.0?
Ford lists SAE 0W-30 meeting specification WSS-M2C963-A1 as an alternative for extremely cold climates where ambient temperatures reach -22°F (-30°C) or below.
Does the oil capacity include the oil filter?
Yes. The specified 7.75-quart capacity includes the oil filter.
Final Thoughts
The 2023 Ford F-150 5.0L V8 requires 7.75 quarts (7.33 liters) of SAE 5W-30 engine oil, including the oil filter. For the best results, use Motorcraft oil or another product that meets Ford specification WSS-M2C961-A1.
Check the oil level regularly, follow the Intelligent Oil-Life Monitor, and use a compatible replacement oil filter during every oil change. These simple maintenance practices help keep your F-150’s Coyote V8 running smoothly for years.
