Knowing your 2010 Ford Fusion oil capacity ensures your engine remains lubricated, cool, and protected from wear and tear. This comprehensive guide covers oil capacity, recommended oil types, maintenance tips, and frequently asked questions to help you keep your Fusion in peak condition.
2010 Ford Fusion Oil Capacity
The 2010 Ford Fusion oil capacity depends on the engine type: the 2.5L 4-cylinder engine holds 5.7 quarts (5.4 liters) of SAE 5W-20 oil, while both the 3.0L V6 and 3.5L V6 engines require 6.0 quarts (5.7 liters) of the same oil type.
Ford recommends using Motorcraft Premium Synthetic Blend 5W-20 or any equivalent oil meeting Ford specification WSS-M2C930-A. For optimal performance and engine protection, change the oil every 7,500 miles or six months, and every 5,000 miles if driving in severe conditions.
Related Ford Engine Oil Capacity Chart(For ALL Models)
Best Engine Oils for 2010 Ford Fusion
Click the Links Below to Check the Latest Prices on AMAZON
1. Motorcraft SAE 5W-20 Synthetic Blend Motor Oil
- Recommended by Ford for all Fusion engines
- Provides excellent wear protection
- Improves fuel economy
- Helps maintain engine cleanliness
2. Castrol GTX MAGNATEC 5W-20 Full Synthetic
- Molecules cling to critical engine parts for constant protection
- Reduces engine wear during start-up
- Delivers consistent performance in stop-and-go driving
- Offers strong low-temperature fluidity
3. Mobil 1 5W-20 Advanced Full Synthetic Motor Oil
- Outstanding high-temperature stability
- Prevents sludge and deposit formation
- Extends oil life for longer drain intervals
- Enhances overall engine performance and durability
Related 2015 Ford Edge 3.5 Oil Capacity(+ Best Recommended Oils)
Recommended Oil Type
For all 2010 Ford Fusion engines, SAE 5W-20 is the recommended viscosity. Ford specifically advises using Motorcraft Premium Synthetic Blend 5W-20 or an equivalent oil that meets the Ford specification WSS-M2C930-A.
Using the correct oil viscosity is important because it helps improve fuel efficiency, ensures smooth engine operation, and minimizes internal friction. Synthetic or synthetic-blend oils also provide better temperature stability and protection against deposits compared to conventional oils.
Step-by-Step Oil Change Procedure
Changing the oil in a 2010 Ford Fusion is straightforward if you have the right tools and follow a few simple steps.
1. Warm up the engine: Run the vehicle for about five minutes to help the oil flow more easily.
2. Park on a level surface: Turn off the engine and let it cool for several minutes.
3. Drain the old oil:
- Locate the oil drain plug underneath the engine.
- Position a drain pan beneath it and remove the plug using a socket wrench.
- Allow the old oil to drain completely.
4. Replace the oil filter:
- Use an oil filter wrench to remove the old filter.
- Lightly coat the new filter’s rubber gasket with fresh oil before installing it.
5. Refill with new oil:
- Reinstall the drain plug securely.
- Pour the correct amount of new oil through the oil filler opening.
6. Check the oil level:
- Start the engine and let it run for one to two minutes.
- Turn it off and wait a minute, then check the dipstick.
- Ensure the oil level is between the “Min” and “Max” marks.
7. Dispose of the old oil properly: Take the used oil and filter to a recycling facility or auto parts store.
Related Ford 8N Engine Oil Capacity(+ Best Recommended Oils)
Oil Change Interval
Ford recommends changing the oil in the 2010 Fusion every 7,500 miles or six months, whichever comes first, under normal driving conditions.
For those who drive in extreme temperatures, dusty areas, or heavy traffic, it is best to change the oil every 5,000 miles to maintain optimal engine health.
Common Signs That Indicate an Oil Change is Needed
Even if you have not yet reached your mileage interval, certain signs can indicate that it’s time for an oil change:
- Oil appears dark and dirty on the dipstick
- The oil change or check engine light is on
- Knocking or ticking noises from the engine
- Excessive exhaust smoke
- Burning oil smell inside the cabin
Related Ford 7.3 Gas Engine Oil Capacity(All Year Series)
FAQs
How much oil does a 2010 Ford Fusion 2.5 take?
The 2010 Ford Fusion with the 2.5-liter 4-cylinder engine takes 5.7 quarts (5.4 liters) of engine oil when the oil filter is replaced. Always check the dipstick after refilling to ensure the oil level is within the proper range.
What oil does a 2010 Ford Fusion 3.5 L take?
The 2010 Ford Fusion equipped with the 3.5-liter V6 engine requires 6.0 quarts (5.7 liters) of SAE 5W-20 engine oil. Ford recommends using Motorcraft Premium Synthetic Blend 5W-20 or an equivalent oil that meets Ford specification WSS-M2C930-A for optimal protection and performance.
How much oil does a 4 cylinder Ford Fusion take?
A 4-cylinder Ford Fusion, such as the 2.5L Duratec engine in the 2010 model, holds 5.7 quarts (5.4 liters) of oil with a filter change. Using the correct amount of oil helps maintain proper lubrication and prevents engine damage.
How much oil does a 2.5 L 4 cylinder engine take?
The 2.5-liter 4-cylinder engine in the 2010 Ford Fusion has an oil capacity of 5.7 quarts (5.4 liters), including the oil filter. Always use the recommended SAE 5W-20 oil type for best performance and efficiency.
What kind of oil does a 2.5 L Ford engine take?
The 2.5L Ford engine uses SAE 5W-20 motor oil. Ford recommends Motorcraft Premium Synthetic Blend 5W-20 or an equivalent high-quality synthetic or synthetic blend oil that meets Ford specification WSS-M2C930-A to ensure maximum engine protection and fuel efficiency.
