The 2008 Scion tC is powered by a 2.4-liter four-cylinder engine (2AZ-FE). This is a proven Toyota engine also used in the Camry and RAV4, known for its balance of power and durability.
To keep it running smoothly, maintaining the correct engine oil type and level is essential. This guide provides detailed information about the 2008 Scion tC oil capacity, oil type, filter options, and maintenance tips.
2008 Scion tC Oil Capacity
The 2008 Scion tC oil capacity is 4.5 quarts (4.3 liters) of SAE 5W-30 engine oil when changing the oil and filter, or 4.2 quarts (4.0 liters) without replacing the filter.
The car is powered by a 2.4L 4-cylinder 2AZ-FE engine, and Toyota recommends using SAE 5W-30 oil, either conventional or full synthetic, for optimal protection and performance.
Oil should be changed every 5,000 miles with conventional oil or up to 10,000 miles with full synthetic, depending on driving conditions. Suitable oil filters include the Toyota OEM 90915-YZZF2, Fram PH4967, Bosch 3330, and Mobil 1 M1-102A.
Related 2006 Scion xB Oil Capacity(+ Best Recommended Oils)
Best Engine Oils for the 2008 Scion tC
Click the Links Below to Check the Latest Prices on AMAZON
1. Mobil 1 Advanced Full Synthetic 5W-30
- Offers superior wear protection and engine cleanliness.
- Performs well in both low and high temperatures.
- Allows for longer intervals between oil changes compared to conventional oils.
2. Castrol EDGE 5W-30 Advanced Full Synthetic
- Uses titanium additive technology to reduce friction.
- Improves fuel efficiency and enhances power delivery.
- Suitable for high-mileage and performance engines.
3. Valvoline Advanced Full Synthetic 5W-30
- Provides strong protection against sludge and deposits.
- Contains anti-wear additives for engine durability.
- Works well in older or high-mileage vehicles.
Related Toyota Engine Oil Capacity Chart(Model A to Z)
Oil Filter Information
Changing the oil filter with every oil change helps ensure clean oil circulates through the engine. Using a high-quality filter prevents contaminants from causing wear or clogging the system.
Recommended oil filters for the 2008 Scion tC include:
- Toyota OEM 90915-YZZF2
- Fram Extra Guard PH4967
- Bosch 3330 Premium Oil Filter
- Mobil 1 M1-102A Extended Performance Filter
OEM filters are the most reliable choice, but reputable aftermarket brands also perform well.
Related Toyota RAV4 Engine Oil Capacity(For All Models 1996 to 2025)
Oil Change Interval
For conventional oil, the 2008 Scion tC should have its oil changed every 5,000 miles or 6 months, whichever comes first.
If you use full synthetic oil, the interval can be extended to 7,500–10,000 miles, depending on driving conditions and oil quality.
Frequent oil changes reduce wear, improve fuel economy, and extend engine life.
Signs That an Oil Change Is Needed
Even with a regular schedule, it is helpful to recognize signs that your Scion tC may need an oil change sooner:
- The oil warning light appears on the dashboard.
- Engine noise increases, such as knocking or ticking.
- The oil on the dipstick is dark and dirty.
- The engine idles roughly or feels sluggish.
- A burning oil smell or smoke comes from the exhaust.
Addressing these signs promptly helps prevent potential engine damage.
Related 2020 Toyota Sienna LE Engine Oil Capacity(& Specifications)
How to Change the Oil in a 2008 Scion tC
If you prefer to handle maintenance yourself, the oil change process is straightforward:
- Warm up the engine for a few minutes, then turn it off.
- Raise the vehicle securely with a jack and jack stands.
- Place a drain pan under the oil drain plug.
- Remove the drain plug and let the oil drain completely.
- Replace the oil filter with a new one.
- Reinstall the drain plug and tighten it securely.
- Add 4.5 quarts of new SAE 5W-30 oil through the oil filler cap.
- Check the oil level with the dipstick and top off if necessary.
- Run the engine briefly and inspect for leaks.
FAQs
How much oil does a 2007 Scion tC 2.4 take?
The 2007 Scion tC with a 2.4-liter 4-cylinder engine takes 4.5 quarts (4.3 liters) of SAE 5W-30 engine oil when changing the oil and filter. Without a filter change, it holds about 4.2 quarts (4.0 liters).
How much oil does a 2.4 L 4 cylinder take?
Most 2.4-liter 4-cylinder engines require between 4.3 and 4.8 quarts (4.1 to 4.5 liters) of engine oil, depending on the specific model and manufacturer. Always check the owner’s manual for the exact capacity.
How many quarts of oil does a 3.7 L V6 take?
A 3.7-liter V6 engine typically holds around 6 quarts (5.7 liters) of engine oil with a filter change. The exact amount can vary slightly based on the make and design of the engine.
How many quarts of oil does a 3.0 V6 Toyota take?
Toyota’s 3.0-liter V6 engines usually require 5.5 quarts (5.2 liters) of SAE 5W-30 motor oil when changing the oil and filter. Always confirm with the vehicle’s owner’s manual to ensure the correct amount.
How much oil does a 2008 Scion tC need?
The 2008 Scion tC with a 2.4L 4-cylinder engine needs 4.5 quarts (4.3 liters) of SAE 5W-30 oil when changing both the oil and filter. For a drain-and-fill without changing the filter, use about 4.2 quarts (4.0 liters).
How much oil does a 2.4 L 4 cylinder Toyota take?
A 2.4-liter 4-cylinder Toyota engine generally requires 4.5 quarts (4.3 liters) of SAE 5W-30 oil when replacing both the oil and filter, ensuring proper lubrication and engine performance.
