Using the wrong amount of oil can lead to poor engine performance, increased wear, or even damage. That’s why we’ve compiled this comprehensive Mopar Engine Oil Capacity Chart to help you identify the correct oil volume for your vehicle.
Below, you’ll find a detailed table listing the engine oil capacity for nearly all Mopar vehicles, including Chrysler, Dodge, Jeep, and Ram models.
Mopar Engine Oil Capacity Chart
Make | Model | Engine Type | Year Range | Oil Capacity (Liters/Quarts) |
---|---|---|---|---|
Chrysler | 200 | 2.4L I4 | 2011–2017 | 4.7 L / 5.0 qt |
Chrysler | 300 | 3.6L V6 / 5.7L V8 / 6.4L V8 | 2011–2025 | 5.7 L / 6.0 qt (V6), 6.6 L / 7.0 qt (V8) |
Chrysler | Pacifica | 3.6L V6 | 2017–2025 | 5.7 L / 6.0 qt |
Chrysler | Voyager | 3.6L V6 | 2020–2025 | 5.7 L / 6.0 qt |
Dodge | Charger | 3.6L V6 / 5.7L V8 / 6.2L / 6.4L V8 | 2011–2025 | 5.7–7.0 L / 6.0–7.4 qt |
Dodge | Challenger | 3.6L V6 / 5.7L / 6.2L / 6.4L V8 | 2008–2025 | 5.7–7.0 L / 6.0–7.4 qt |
Dodge | Durango | 3.6L V6 / 5.7L V8 / 6.4L V8 | 2011–2025 | 5.7–6.6 L / 6.0–7.0 qt |
Dodge | Journey | 2.4L I4 / 3.6L V6 | 2009–2020 | 4.3 L / 4.5 qt (I4), 5.7 L / 6.0 qt (V6) |
Dodge | Grand Caravan | 3.6L V6 | 2011–2020 | 5.7 L / 6.0 qt |
Dodge | Viper | 8.4L V10 | 2008–2017 | 10.4 L / 11.0 qt |
Jeep | Cherokee | 2.4L I4 / 3.2L V6 | 2014–2025 | 4.7 L / 5.0 qt (I4), 5.2 L / 5.5 qt (V6) |
Jeep | Grand Cherokee | 3.6L V6 / 5.7L V8 / 6.4L / 6.2L | 2011–2025 | 5.7–7.0 L / 6.0–7.4 qt |
Jeep | Wrangler | 2.0L Turbo / 3.6L V6 / 6.4L V8 | 2012–2025 | 4.7–6.6 L / 5.0–7.0 qt |
Jeep | Compass | 2.4L I4 | 2011–2025 | 4.7 L / 5.0 qt |
Jeep | Renegade | 1.3L / 2.4L I4 | 2015–2025 | 3.8–4.7 L / 4.0–5.0 qt |
Jeep | Gladiator | 3.6L V6 / 3.0L Diesel | 2020–2025 | 5.7 L / 6.0 qt (V6), 9.5 L / 10.0 qt (Diesel) |
Jeep | Patriot | 2.0L I4 / 2.4L I4 | 2007–2017 | 4.3 L / 4.5 qt |
Jeep | Liberty | 3.7L V6 | 2008–2012 | 4.7 L / 5.0 qt |
Ram | 1500 | 3.6L V6 / 5.7L V8 / 6.2L | 2009–2025 | 5.7–7.0 L / 6.0–7.4 qt |
Ram | 2500 / 3500 | 6.4L V8 / 6.7L Diesel | 2011–2025 | 6.6 L / 7.0 qt (V8), 12.0 L / 12.7 qt (Diesel) |
Ram | ProMaster City | 2.4L I4 | 2015–2025 | 4.3 L / 4.5 qt |
Ram | ProMaster 1500–3500 | 3.6L V6 | 2013–2025 | 5.7 L / 6.0 qt |
Note: Oil capacities are approximate and may vary by model year, engine configuration, or oil pan type.
Related Ford Engine Oil Capacity Chart(Models A to Z)
Recommended Oil Types for Mopar Vehicles
While capacities differ, most modern Mopar engines require synthetic or semi-synthetic oils, often with a 0W-20, 5W-20, or 5W-30 viscosity grade, depending on the engine. Always consult your owner’s manual or Mopar service center for the most accurate recommendation.
How Often Should You Change Mopar Engine Oil?
Most Mopar vehicles recommend changing the engine oil every 5,000 to 10,000 miles, depending on driving conditions and oil type. If you drive in dusty environments, tow heavy loads, or do frequent short trips, consider changing oil more often.
Related Best Synthetic Engine Oil for Diesel Engines(5 Best 2025)
Mopar Oil Change Tips
- Warm up your engine before draining the oil to help it flow out smoothly.
- Always replace the oil filter with each oil change.
- Use a torque wrench to tighten the drain plug to the specified torque setting.
- Properly dispose of used oil at an authorized recycling center.
Related Cummins Engine Oil Capacity Chart(A to Z Models)
FAQs
How much oil does a 3.6 Mopar take?
A Mopar 3.6L Pentastar V6 engine typically takes 5.7 liters (6.0 quarts) of engine oil. This applies to many models across the Chrysler, Dodge, Jeep, and Ram lineups. Always check your owner’s manual to confirm, as some variations may slightly differ based on the model year and oil filter used.
How much oil does a Mopar 340 engine hold?
The classic Mopar 340 cubic inch V8 engine generally holds 5 quarts (4.7 liters) of oil with a standard oil filter. If you’re using a high-capacity oil pan or aftermarket components, the capacity could vary, so it’s important to measure during your oil change or consult technical specifications for modified setups.
Related Electric Engine Oil Pump(Top 5 Best 2025)
What is the normal engine oil capacity?
For most modern passenger vehicles, the normal engine oil capacity ranges from 4 to 6 quarts (3.8 to 5.7 liters). Smaller engines like 4-cylinders usually require around 4.0–4.5 quarts, while larger V6 and V8 engines may require 5.0–7.0 quarts or more. Always refer to the specific manufacturer’s recommendations.
How many quarts of oil does a 2.4 L Chrysler engine take?
A 2.4L Chrysler engine, commonly found in models like the Chrysler 200 and Jeep Compass, typically takes 4.7 liters (5.0 quarts) of engine oil. This includes the oil needed for both the engine and the filter. Double-check the owner’s manual for year-specific differences.
How long does Mopar oil last?
Mopar recommends oil change intervals of up to 10,000 miles or 12 months, depending on driving conditions and the type of oil used, typically synthetic or synthetic blend. However, for vehicles driven in extreme conditions or under heavy load, more frequent oil changes every 5,000 to 7,500 miles may be necessary for optimal engine health.
How much oil does a 5.7 Mopar take?
The 5.7L HEMI V8 engine used in many Dodge, Jeep, Chrysler, and Ram vehicles typically requires 6.6 liters (7.0 quarts) of engine oil, including the oil filter. It is always best to verify with your specific model’s service guide, especially if there are aftermarket upgrades or different oil pan configurations.