This article provides an in-depth look at the New Holland engine oil capacity chart, helping you understand the right oil requirements for various models.
New Holland Engine Oil Capacity Chart
| Model | Engine Type | Oil Capacity (Liters/Quarts) | Recommended Oil Type |
|---|---|---|---|
| New Holland T4.75 | 4-Cylinder Diesel | 8.5L (9.0 Quarts) | 15W-40 or 10W-30 |
| New Holland T5.110 | 4-Cylinder Diesel | 9.0L (9.5 Quarts) | 15W-40 or 10W-30 |
| New Holland T6.155 | 6-Cylinder Diesel | 13.6L (14.4 Quarts) | 15W-40 or 10W-30 |
| New Holland T7.210 | 6-Cylinder Diesel | 17.0L (18.0 Quarts) | 15W-40 or 10W-30 |
| New Holland TC30 | 3-Cylinder Diesel | 5.7L (6.0 Quarts) | 15W-40 or 10W-30 |
| New Holland Workmaster 50 | 3-Cylinder Diesel | 6.6L (7.0 Quarts) | 15W-40 or 10W-30 |
| New Holland 555E Backhoe | 4-Cylinder Diesel | 11.3L (12.0 Quarts) | 15W-40 or 10W-30 |
Read New Holland Engine Oil Capacity(Manufacturer’s Guide)
New Holland Engine Oil Brands and Specifications
| Brand | Viscosity | Specification | Size |
|---|---|---|---|
| NHA/NHC | SAE 0W-40 | CK-4 Full-Synthetic | 2.5 Gal / 9.46 L |
| CNH Industrial | SAE 0W-40 | CK-4 Full-Synthetic | 55 Gal / 208.19 L |
| CNH Industrial | SAE 0W-40 | CK-4 Full-Synthetic | 257 Gal / 972.85 L |
| NHA/NHC | SAE 10W-40 | CK-4 Semi-Synthetic | 1 Gal / 3.78 L |
| NHA/NHC | SAE 10W-40 | CK-4 Semi-Synthetic | 2.5 Gal / 9.46 L |
| NHA/NHC | SAE 10W-40 | CK-4 Semi-Synthetic | 5 Gal / 18.92 L |
| CNH Industrial | SAE 10W-40 | CK-4 Semi-Synthetic | 55 Gal / 208.19 L |
| CNH Industrial | SAE 10W-40 | CK-4 Semi-Synthetic | 257 Gal / 972.85 L |
| NHA/NHC | SAE 15W-40 | CK-4 | 1 Qt / 0.94 L |
| NHA/NHC | SAE 15W-40 | CK-4 | 1 Gal / 3.78 L |
| NHA/NHC | SAE 15W-40 | CK-4 | 2.5 Gal / 9.46 L |
| NHA/NHC | SAE 15W-40 | CK-4 | 5 Gal / 18.92 L |
| CNH Industrial | SAE 15W-40 | CK-4 | 55 Gal / 208.19 L |
| CNH Industrial | SAE 15W-40 | CK-4 | 257 Gal / 972.85 L |
| NHA/NHC | SAE 10W-30 | CK-4 | 1 Qt / 0.94 L |
| NHA/NHC | SAE 10W-30 | CK-4 | 1 Gal / 3.78 L |
| NHA/NHC | SAE 10W-30 | CK-4 | 2.5 Gal / 9.46 L |
| NHA/NHC | SAE 10W-30 | CK-4 | 5 Gal / 18.92 L |
| CNH Industrial | SAE 10W-30 | CK-4 | 55 Gal / 208.19 L |
| CNH Industrial | SAE 10W-30 | CK-4 | 257 Gal / 972.85 L |
| CNH Industrial | SAE 30 | 1 Qt / 0.94 L | |
| CNH Industrial | SAE 30 | 1 Gal / 3.78 L | |
| CNH Industrial | SAE 30 | 2.5 Gal / 9.46 L | |
| CNH Industrial | SAE 30 | 5 Gal / 18.92 L | |
| CNH Industrial | SAE 30 | 55 Gal / 208.19 L | |
| Shell | SAE 5W-30 | SN/GF-5 | 1 Qt / 0.94 L |
| Shell | SAE 5W-30 | SN/GF-5 | 55 Gal / 208.19 L |
| Shell | SAE 10W-30 | SN/GF-5 | 1 Qt / 0.94 L |
| Shell | SAE 10W-30 | SN/GF-5 | 5 Qt / 4.73 L |
| Shell | SAE 10W-30 | SN/GF-5 | 55 Gal / 208.19 L |
| Shell | SAE 30 | Low Ash | 1 Qt / 0.94 L |
Read Engine Oil Specification Chart(A to Z Guide)
Why Engine Oil Capacity Matters
The engine oil in a tractor or any heavy equipment serves multiple functions:
- Lubrication: Reduces friction between moving parts.
- Cooling: Helps dissipate heat generated during operation.
- Cleaning: Prevents sludge buildup by carrying away dirt and contaminants.
- Corrosion Protection: Prevents rust and corrosion of engine components.
Using the wrong oil capacity can lead to poor engine performance, overheating, increased wear and tear, and even engine failure.
How to Choose Right Engine Oil for New Holland
1. Check Your Owner’s Manual
Every New Holland tractor or machine has a manufacturer-recommended oil type and capacity. check the table above for reference.
2. Consider the Climate
- Cold Climates: Use a 10W-30 oil for better cold-start performance.
- Hot Climates: 15W-40 oil is preferable for high-temperature conditions.
Read Engine Oil Temperature Chart(Complete Guide)
3. Use High-Quality Oil
New Holland recommends CJ-4, CK-4, or API CH-4-rated engine oils to maintain optimal performance and durability. Avoid using low-quality oils, as they can lead to premature engine wear.
4. Regular Oil Changes Matter
Oil degrades over time due to heat and contaminants. Change your engine oil at the intervals recommended in the manual (typically every 100 to 500 hours of operation).
Read Will an Oil Change Increase Gas Mileage(Experts Agree on This)
How to Change Engine Oil in New Holland Tractors
Step 1: Gather Your Tools and Supplies
- Engine oil (as per capacity chart)
- Oil filter
- Drain pan
- Funnel
- Wrench for drain plug
- Shop rags for cleanup
Step 2: Warm Up the Engine
Run the engine for 5-10 minutes to warm up the oil. This helps it drain more efficiently.
Step 3: Drain the Old Oil
- Place a drain pan under the oil drain plug.
- Remove the plug and let the oil drain completely.
- Once drained, replace the plug securely.
Read How to Clean Funnel After Oil Change(Don’t Make These Mistakes)
Step 4: Replace the Oil Filter
- Unscrew the old oil filter and replace it with a new one.
- Apply a thin layer of oil to the new filter’s gasket before installing.
Step 5: Refill with New Oil
- Use a funnel to pour the recommended oil into the engine.
- Check the dipstick to ensure the correct oil level.
Step 6: Start the Engine and Check for Leaks
- Run the engine for a few minutes to circulate the oil.
- Check for leaks around the drain plug and filter.
Step 7: Check Oil Level Again
Let the engine sit for a few minutes, then recheck the oil level using the dipstick. Add more oil if needed.
Read Kohler Engine Oil Chart(A to Z Guide)
FAQ
How many quarts of oil does a New Holland tractor take?
The oil capacity of a New Holland tractor depends on the model. Here are some general guidelines:
- Compact tractors (TC30, Workmaster 50) – Around 6-7 quarts
- Mid-sized tractors (T4, T5, T6 series) – Between 9-14 quarts
- Larger tractors (T7 series) – Up to 18 quarts
Always refer to the owner’s manual for exact specifications.
How much engine oil capacity?
The engine oil capacity varies by model. On average, New Holland tractors hold between 5.7 liters (6 quarts) and 17 liters (18 quarts). The correct capacity is crucial for optimal performance and engine longevity.
What oil is recommended for New Holland engines?
New Holland recommends 15W-40 or 10W-30 engine oil, depending on climate and operating conditions. Always use oil that meets API CH-4, CJ-4, or CK-4 standards for best results. Synthetic oils can also be used for extended performance.
Read Engine Oil Thickness Chart(A to Z Guide)
How much oil does a New Holland LX665 take?
The New Holland LX665 skid steer takes approximately 8.5 quarts (8 liters) of engine oil.
How much oil does a New Holland LS160 take?
The New Holland LS160 skid steer requires around 7.6 quarts (7.2 liters) of engine oil.
What engine is in a New Holland LX665?
The New Holland LX665 is equipped with a New Holland 332T/JF 3-cylinder turbo diesel engine. It delivers approximately 50 horsepower.
How often do you change oil in a New Holland tractor?
Most New Holland tractors require an oil change every 100 to 500 hours of operation, depending on the model, workload, and oil type used. Checking the oil level regularly and following the maintenance schedule ensures long engine life.
Read Does Engine Oil Have A Use By Date(how long does oil last)
What is the engine capacity of New Holland?
The engine displacement (capacity) varies by model. Some examples include:
- New Holland T4.75 – 3.4L (4-cylinder diesel)
- New Holland T5.110 – 3.4L (4-cylinder diesel)
- New Holland T6.155 – 6.7L (6-cylinder diesel)
- New Holland LX665 – 3.3L (3-cylinder turbo diesel)
How many quarts of oil does a diesel engine hold?
The oil capacity of a diesel engine depends on size and design. Small diesel engines, such as those in compact tractors, typically hold 6-9 quarts, while larger agricultural tractors and industrial engines can hold 14-18 quarts or more.
Final word
Maintaining your New Holland tractor’s engine oil at the right capacity is essential for optimal performance and longevity. Always use high-quality oil, follow manufacturer guidelines, and perform regular oil changes.
