This guide explains the oil capacity of the Honda Rebel 500, when to check it, and how much oil to add depending on your service situation.
Honda Rebel 500 Oil Capacity
The Honda Rebel 500 oil capacity is 2.7 liters (about 2.85 quarts) when changing both the oil and the filter, while an oil change without replacing the filter requires 2.5 liters, and a completely dry engine fill (such as after a rebuild) takes 3.2 liters.
Honda recommends using JASO MA/MA2-rated motorcycle oil, typically 10W-30 or 10W-40, depending on the climate. To check the oil level, warm up the engine, turn it off, hold the bike upright, and verify that the oil sits between the upper and lower marks in the sight glass.
Recommended Rebel 500 Engine Oil Type
Click the Links Below to Check the Latest Prices on AMAZON
1. Motul 7100 4T 10W-40 (Full Synthetic)
- Full synthetic oil formulated with Ester technology for high engine protection
- Meets JASO MA2 standards for smooth clutch performance
- Provides excellent temperature stability for both city and highway riding
- Reduces engine noise and improves gear shifting smoothness
2. Liqui Moly Motorbike 4T Synth 5W-40
- Fully synthetic, engineered for strong lubrication under high heat and load
- Designed for motorcycles with wet clutches
- Offers quick cold-start protection and consistent performance in varying temperatures
- Known for keeping engines clean and reducing internal wear
3. Honda GN4 10W-30 (Honda OEM Oil)
- Official Honda-recommended oil specifically formulated for Honda motorcycle engines
- Provides reliable protection for everyday riding
- Stable viscosity and good thermal resistance
- Ideal for riders who prefer to maintain factory-spec oil performance
Honda recommends oil that meets the following specifications:
- JASO MA or MA2-rated motorcycle oil
- Viscosity suitable for the climate: 10W-30 or 10W-40
For most riders, 10W-40 is a safe all-season choice, especially in warmer climates.Related Honda Engine Oil Capacity Chart(Models A to Z)
How to Check the Oil Level Correctly
- Start the motorcycle and let it warm up for 3–5 minutes.
- Turn off the engine and allow oil to settle for 2 minutes.
- Keep the motorcycle upright, not on the side stand.
- Look at the engine sight glass.
- The oil level should be between the upper and lower marks.
Checking the level after filling is important because simply pouring the listed amount can still vary slightly depending on how fully the old oil drained.
Tips for Changing the Oil on a Honda Rebel 500
- Warm the engine first so the oil drains more fully.
- Use a new crush washer on the drain plug each time.
- Be prepared for oil to drip when removing the filter; placing foil or a rag underneath helps avoid mess.
- After refilling and running the engine, check for leaks around both the drain plug and the oil filter.
- Always re-check the sight glass after the engine has cooled for a few minutes.
Related Harley Davidson Engine Oil Capacity Chart(For ALL Models)
Oil Change Intervals
| Riding Condition | Suggested Oil Change Interval |
|---|---|
| Regular city / highway use | Every 4,000–5,000 miles (6,000–8,000 km) |
| Heavy riding / hot climates | Every 3,000 miles (5,000 km) |
| Infrequent riding / seasonal use | Change at least once per year |
Important Things to Avoid
- Do not overfill the crankcase. Too much oil can cause pressure buildup.
- Do not use car oil. Motorcycle oil is designed for wet clutch systems.
- Do not skip the warm-up and sight-glass check after refilling.
Related Honda GX160 Engine Oil Capacity(+ Best Recommended Oil)
FAQs
How much oil does a Rebel 500 take?
A Honda Rebel 500 typically takes 2.7 liters (about 2.85 quarts) of oil when changing both the oil and the filter. If you are not changing the filter, the engine will require approximately 2.5 liters.
How many litres are in a Honda Rebel 500?
The Honda Rebel 500 requires 2.7 liters of oil during a standard oil and filter change. For a completely dry engine, such as after a rebuild, the capacity is around 3.2 liters.
How much oil does a Honda 500 take?
For most Honda 500cc motorcycle engines, including the Rebel 500, the average oil capacity ranges from 2.5 to 2.8 liters, depending on whether the oil filter is replaced during the service.
How much oil does a Honda BF50 take?
The Honda BF50 outboard motor typically takes around 1.7 to 2.1 liters of engine oil, depending on the specific model and whether the oil filter is changed.
What oil should I put in my Honda Rebel 500?
Use a JASO MA or MA2 motorcycle-rated oil, typically 10W-30 or 10W-40. These oils are designed for wet clutch systems and will protect the engine while maintaining smooth transmission performance.
Can I use 10W40 instead of 10W30 Honda?
Yes, you can use 10W-40 instead of 10W-30, especially if you ride in warmer climates or under heavier load conditions. Both viscosities are acceptable as long as the oil meets JASO MA/MA2 requirements.
