2015 Ford Edge 3.5 Oil Capacity(+ Best Recommended Oils)

If you own or maintain a 2015 Ford Edge with the 3.5L V6 engine, knowing the correct oil capacity and maintenance procedure is essential for keeping your SUV in top condition.

This guide covers the oil capacity, recommended oil type, and key steps for performing a proper oil change.

2015 Ford Edge 3.5 Oil Capacity

The 2015 Ford Edge 3.5L V6 engine has an oil capacity of 6.0 quarts (approximately 5.7 liters) when the oil filter is replaced. Ford recommends using SAE 5W-20 full synthetic motor oil that meets the manufacturer’s specifications (such as WSS-M2C930-A) for optimal performance and engine protection.

During an oil change, fill with about 5.5 quarts first, then check the dipstick and top up as needed to reach the “FULL” mark, ensuring the engine is neither underfilled nor overfilled.

Best Recommended Oil for 2015 Ford

Click the Links Below to Check the Latest Prices on AMAZON

1. Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil

Officially recommended by Ford and manufactured to meet OEM specifications.
SAE 5W-20 viscosity grade, perfectly suited for the 2015 Ford Edge 3.5L V6 engine.
Synthetic blend formula provides better protection than conventional oils, especially in extreme temperatures.
Helps maintain factory-level performance and engine cleanliness.

2. Pennzoil Platinum Full Synthetic 5W-20 Motor Oil

Made from natural gas using PurePlus technology for a cleaner, high-quality base oil.
Full synthetic formulation designed to reduce engine wear and keep pistons up to 40% cleaner.
Provides improved fuel economy and protection in both high and low temperatures.
Meets or exceeds modern industry standards, including API SP and ILSAC GF-6A.

3. Mobil 1 Extended Performance Full Synthetic 5W-20

Designed for long-lasting protection with up to 20,000 miles of performance under normal driving conditions.
Full synthetic oil with advanced additive technology for reduced engine wear and better cleanliness.
Meets the latest ILSAC GF-6 standards and provides superior timing-chain and LSPI protection.
Ideal for drivers who take frequent long trips or prefer extended oil-change intervals.

Step-by-Step Oil Change Procedure

Performing an oil change correctly is crucial for maintaining your vehicle’s performance and longevity. Follow these steps carefully:

1. Warm Up the Engine

Run the engine for about 3–5 minutes. This helps warm the oil so it drains more easily, but ensure the engine is not hot to avoid burns.

2. Park on Level Ground

Turn off the engine and park on a flat surface. Wait a few minutes to allow the oil to settle in the oil pan.

3. Drain the Old Oil

Place a drain pan beneath the oil pan and remove the drain plug. Allow all the old oil to drain completely. Replace and tighten the drain plug securely once the oil has stopped flowing.

4. Replace the Oil Filter

Remove the old oil filter and install a new one. Lightly coat the new filter’s rubber gasket with clean oil before installation. Hand-tighten the filter until snug.

5. Add New Engine Oil

Pour in approximately 5.5 to 6 quarts of fresh 5W-20 synthetic oil through the oil filler cap. Avoid overfilling—add most of the oil first, then check the dipstick and top up gradually.

6. Check the Oil Level

Start the engine and let it run for about a minute to circulate the new oil. Turn it off and wait a few minutes, then pull out the dipstick, wipe it clean, reinsert it, and check the level. The oil should be between the “MIN” and “MAX” marks. Adjust as necessary.

7. Reset the Oil Life Monitor

After completing the oil change, reset the oil life monitor on the dashboard. This feature helps you track when your next oil change is due.

8. Record Maintenance Details

Keep a record of the date, mileage, oil brand, and filter type used. This helps maintain a clear maintenance history and can increase resale value.

Why Correct Oil Capacity Matters

Using the proper oil capacity is vital for the health of your Ford Edge’s engine.

Underfilling: Too little oil can cause inadequate lubrication, leading to friction, overheating, and engine wear.
Overfilling: Too much oil can cause the crankshaft to churn through excess oil, leading to aeration (foaming) and reduced lubrication efficiency. This can damage seals, cause leaks, or even harm the engine.
Proper Level: Keeping the oil level right at the “FULL” mark ensures optimal lubrication and engine protection.

Always recheck the oil level a few days after an oil change, as oil can settle and readings may vary slightly.

Oil Change Interval

Ford recommends changing the oil in the 2015 Ford Edge every 7,500 to 10,000 miles when using full synthetic oil under normal driving conditions. If you frequently drive in dusty areas, extreme temperatures, or heavy traffic, consider changing it every 5,000 miles for added protection.

The oil life monitoring system will alert you when it’s time for a change, but it’s always wise to check your oil condition regularly between services.

Maintenance Tips for the 2015 Ford Edge 3.5L

Use OEM or high-quality oil filters to prevent contaminants from circulating through the engine.
Inspect the drain plug washer during every oil change and replace it if it is worn out.
Avoid mixing oil brands or viscosities, as this can reduce oil performance.
Check for oil leaks after completing the oil change.
Always dispose of used oil and filters properly at a recycling center or auto parts store.

FAQs

How many quarts of oil does a 2015 Ford Edge 3.5L take?

The 2015 Ford Edge with the 3.5-liter V6 engine takes 6.0 quarts (approximately 5.7 liters) of engine oil when the oil filter is replaced. Always check the dipstick after refilling to ensure the level is correct.

How much oil does a 2015 Ford 3.5 take?

A 2015 Ford vehicle equipped with the 3.5L V6 engine generally requires 6 quarts of oil with a filter change. The exact capacity may vary slightly depending on the model, but 6 quarts is the standard specification.

How much oil does a Ford 3.5L V6 hold?

The Ford 3.5L V6 engine holds approximately 6 quarts (5.7 liters) of oil, including the filter. Using the correct amount ensures optimal lubrication and engine performance.

How much oil does a 2015 Ford Explorer 3.5 take?

The 2015 Ford Explorer with the same 3.5L V6 engine also takes 6 quarts (5.7 liters) of engine oil when the filter is changed. Always verify the oil level using the dipstick after refilling.

How many quarts of oil does a 3.5 V6 hold?

A 3.5-liter V6 engine typically holds around 6 quarts of oil, though this can vary slightly depending on the vehicle model and whether the oil filter is replaced. Checking the owner’s manual or dipstick ensures accurate filling.

Final Thoughts

For your 2015 Ford Edge 3.5L V6, the correct engine oil capacity is 6.0 quarts (5.7 liters) when changing oil and filter. Use a 5W-20 full synthetic oil that meets Ford’s specifications to ensure maximum performance and protection.